156-315-71 questions and answers

To choose our DumpLeader to is to choose success! DumpLeader provide you CheckPoint certification 156-315-71 exam practice questions and answers, which enable you to pass the exam successfully. Simulation tests before the formal CheckPoint certification 156-315-71 examination are necessary, and also very effective. If you choose DumpLeader, you can 100% pass the exam.

DumpLeader's CheckPoint 156-315-71 exam training materials allows candidates to learn in the case of mock examinations. You can control the kinds of questions and some of the problems and the time of each test. In the site of DumpLeader, you can prepare for the exam without stress and anxiety. At the same time, you also can avoid some common mistakes. So you will gain confidence and be able to repeat your experience in the actual test to help you to pass the exam successfully.

CheckPoint 156-315-71 exam is an popular examination of the IT industry , and it is also very important. We prepare the best study guide and the best online service specifically for IT professionals to provide a shortcut. DumpLeader CheckPoint 156-315-71 exam covers all the content of the examination and answers you need to know . Tried Exams ot DumpLeader , you know this is something you do everything possible to want, and it is really perfect for the exam preparation.

From DumpLeader website you can free download part of DumpLeader's latest CheckPoint certification 156-315-71 exam practice questions and answers as a free try, and it will not let you down. DumpLeader latest CheckPoint certification 156-315-71 exam practice questions and answers and real exam questions is very close. You may have also seen on other sites related training materials, but will find their Source DumpLeader of you carefully compare. The DumpLeader provide more comprehensive information, including the current exam questions, with their wealth of experience and knowledge by DumpLeader team of experts to come up against CheckPoint certification 156-315-71 exam.

Exam Code: 156-315-71
Exam Name: CheckPoint (Check Point Certified Security Expert R71)
One year free update, No help, Full refund!
Total Q&A: 480 Questions and Answers
Last Update: 2014-02-20

156-315-71 Free Demo Download: http://www.dumpleader.com/156-315-71_exam.html

NO.1 What command will allow you to disable sync on a cluster firewall member?
A. fw ctl setsync 0
B. fw ctl sysnstat stop
C. fw ctl sysnstat off
D. fw ctl setsyns off
Answer: D

CheckPoint   156-315-71   156-315-71 answers real questions

NO.2 Which external user authentication protocols are supported in SSL VPN?
A. LDAP, Active Directory, SecurID
B. DAP, SecurID, Check Point Password, OS Password, RADIUS, TACACS
C. LDAP, RADIUS, Active Directory, SecurID
D. LDAP, RADIUS, TACACS, SecurID
Answer: B

CheckPoint   156-315-71   156-315-71 answers real questions

NO.3 Which of the following is NOT a feature of ClusterXL?
A. Enhanced throughput in all ClusterXL modes (2 gateway cluster compared with 1 gateway)
B. Transparent failover in case of device failures
C. Zero downtime for mission-critical environments with State Synchronization
D. Transparent upgrades
Answer: C

CheckPoint test answers   156-315-71 test questions   156-315-71 braindump   156-315-71 exam dumps   156-315-71 answers real questions

NO.4 Control connections between the Security Management Server and the Gateway are not encrypted by
the VPN Community. How are these connections secured?
A. They are encrypted and authenticated using SIC.
B. They are not encrypted, but are authenticated by the Gateway
C. They are secured by PPTP
D. They are not secured.
Answer: D

CheckPoint   156-315-71   156-315-71   156-315-71 Bootcamp

NO.5 What is a task of the SmartEvent Correlation Unit?
A. Add events to the events database.
B. Look for patterns according to the installed Event Policy.
C. Assign a severity level to an event
D. Display the received events.
Answer: B

CheckPoint   156-315-71   156-315-71 study guide

NO.6 When you check Web Server in a host-node object, what happens to the host?
A. The Web server daemon is enabled on the host.
B. More granular controls are added to the host, in addition to Web Intelligence tab settings.
C. You can specify allowed ports in the Web server's node-object properties. You then do not need to list
all allowed ports in the Rule Base.
D. IPS Web Intelligence is enabled to check on the host.
Answer: B

CheckPoint exam prep   156-315-71 braindump   156-315-71 answers real questions

NO.7 Which procedure creates a new administrator in SmartWorkflow?
A. Run cpconfig, supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
B. In SmartDashboard, click SmartWorkflow / Enable SmartWorkflow and the Enable SmartWorkflow
wizard will start. Supply the Login Name, Profile Properties, Name, Access Applications and Permissions
when prompted.
C. On the Provider-1 primary MDS, run cpconfig, supply the Login Name, Profile Properties, Name,
Access Applications and Permissions.
D. In SmartDashboard, click Users and Administrators right click Administrators / New Administrator and
supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
Answer: D

CheckPoint test   156-315-71   156-315-71   156-315-71

NO.8 How does a cluster member take over the VIP after a failover event?
A. Ping the sync interface
B. if list -renew
C. Broadcast storm
D. Gratuitous ARP
Answer: D

CheckPoint   156-315-71   156-315-71 demo

NO.9 You are MegaCorp Security Administrator. This company uses a firewall cluster, consisting of two
cluster members. The cluster generally works well but one day you find that the cluster is behaving
strangely. You assume that there is a connectivity problem with the cluster synchronization cluster link
(cross-over cable).
Which of the following commands is the best for testing the connectivity of the crossover cable?
A. telnet <IP address of the synchronization interface on the other cluster member>
B. arping <IP address of the synchronization interface on the other cluster member>
C. ifconfig a
D. Ping <IP address of the synchronization interface on the other cluster member>
Answer: B

CheckPoint exam simulations   156-315-71 demo   156-315-71 exam prep

NO.10 Refer to Exhibit:
Match the ClusterXL Modes with their configurations
A. A-3, B-2, C-1, D-4
B. A-3, B-2, C-4, D-1
C. A-2, B-3, C-4, D-1
D. A-2, B-3, C-1, D-4
Answer: C

CheckPoint practice questions   156-315-71   156-315-71   156-315-71 test questions   156-315-71

NO.11 You want to verify that your Check Point cluster is working correctly. Which command line tool can you
use?
A. cphaconf state
B. cphaprob state
C. cphainfo-s
D. cphastart -status
Answer: B

CheckPoint   156-315-71   156-315-71   156-315-71   156-315-71 test answers

NO.12 You are establishing a ClusterXL environment, with the following topology: External interfaces
192.168.10.1 and 192.168.10.2 connect to a VLAN switch. The upstream router connects to the same
VLAN switch. Internal interfaces 172.16 10.1 and 172.16.10.2 connect to a hub. 10.10.10.0 is the
synchronization network. The Security Management Server is located on the internal network with IP
172.16.10.3. What is the problem with this configuration?
A. There is an IP address conflict
B. The Security Management Server must be in the dedicated synchronization network, not the internal
network.
C. The Cluster interface names must be identical across all cluster members.
D. Cluster members cannot use the VLAN switch. They must use hubs.
Answer: B

CheckPoint original questions   156-315-71   156-315-71 pdf   156-315-71 test

NO.13 Which of the following manages Standard Reports and allows the administrator to specify automatic
uploads of reports to a central FTP server?
A. Smart Dashboard Log Consolidator
B. Security Management Server
C. Smart Reporter Database
D. Smart Reporter
Answer: D

CheckPoint practice questions   Braindumps 156-315-71   156-315-71 demo   156-315-71   156-315-71

NO.14 Which of the following statements about the Port Scanning feature of IPS is TRUE?
A. The default scan detection is when more than 500 open inactive ports are open for a period of 120
seconds.
B. The Port Scanning feature actively blocks the scanning, and sends an alert to SmartView Monitor.
C. Port Scanning does not block scanning; it detects port scans with one of three levels of detection
sensitivity.
D. When a port scan is detected, only a log is issued, never an alert.
Answer: C

CheckPoint exam prep   156-315-71   156-315-71   156-315-71

NO.15 Organizations are sometimes faced with the need to locate cluster members in different geographic
locations that are distant from each other. A typical example is replicated data centers whose location is
widely separated for disaster recovery purposes.
What are the restrictions of this solution?
A. There are no restrictions.
B. There is one restriction: The synchronization network must guarantee no more than 150 ms latency
(ITU Standard G.114).
C. There is one restriction: The synchronization network must guarantee no more than 100 ms latency.
D. There are two restrictions: 1. The synchronization network must guarantee no more than 100ms
latency and no more than 5% packet loss. 2. The synchronization network may only include switches and
hubs.
Answer: D

CheckPoint   156-315-71   156-315-71   Braindumps 156-315-71   156-315-71 test questions

NO.16 You need to publish SecurePlatform routes using the ospf routing protocol. What is the correct
command structure, once entering the route command, to implement ospf successfully?
A. Run cpconfig utility to enable ospf routing
B. ip route ospf
ospf network1
ospf network2
C. Enable
Configure terminal
Router ospf [id]
Network [network] [wildmask] area [id]
D. Use DBedit utility to either the objects_5_0.c file
Answer: C

CheckPoint questions   156-315-71   156-315-71 practice questions   156-315-71   156-315-71   156-315-71 certification training

NO.17 Which of the following commands can be used to stop Management portal services?
A. fw stopportal
B. cpportalstop
C. cpstop / portal
D. smartportalstop
Answer: D

CheckPoint original questions   156-315-71   156-315-71   156-315-71

NO.18 Check point Clustering protocol, works on:
A. UDP 8116
B. UDP 500
C. TCP 8116
D. TCP 19864
Answer: A

CheckPoint study guide   156-315-71 exam   156-315-71 test questions

NO.19 ________is a proprietary Check Point protocol. it is the basis for Check Point ClusterXL inter-module
communication.
A. RDP
B. CCP
C. CKPP
D. HA OPCODE
Answer: B

CheckPoint   156-315-71 study guide   Braindumps 156-315-71   156-315-71 exam dumps   156-315-71 test answers   156-315-71

NO.20 John is configuring a new R71 Gateway cluster but he can not configure the cluster as Third Party IP
Clustering because this option is not available in Gateway Cluster Properties: What's happening?
A. John is not using third party hardware as IP Clustering is part of Check Point's IP Appliance B .Third
Party Clustering is not available for R71 Security Gateways.
B. ClusterXL needs to be unselected to permit 3rd party clustering configuration.
C. John has an invalid ClusterXL license.
Answer: C

CheckPoint test questions   156-315-71 exam simulations   156-315-71 answers real questions

DumpLeader offer the latest 648-385 exam material and high-quality 700-302 pdf questions & answers. Our M70-301 VCE testing engine and 70-480 study guide can help you pass the real exam. High-quality 700-101 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.dumpleader.com/156-315-71_exam.html